 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD74AC539 Dual 1-of-4 Decoder with 3-State Output Description The HD74AC539 contains two inpedendent decoders. Each accepts two Address (A 0, A1) input signals and decodes them to select one of four mutually exclusive outputs. A polarity control input (P) determines whether the outputs are active HIGH (P = L) or active LOW (P = H). An active LOW input Enable (E) is available for data demultiplexing; data is routed to the selected output in non-inverted form in the active LOW mode or in inverted form in the active HIGH mode. A HIGH signal on the active LOW Output Enable (OE) input forces the 3-state outputs to the high impedance state. Feature * Outputs Source/Sink 24 mA HD74AC539 Pin Arrangement O2b 1 O1b 2 O0b 3 Pb 4 OEb 5 A0a 6 A1a 7 O3a 8 O2a 9 GND 10 (Top view) 20 VCC 19 O3b 18 A1b 17 A0b 16 Eb 15 Ea 14 OEa 13 Pa 12 O0d 11 O1a Logic Symbol P E A0 A1 E P A0 A1 DECODER a OE O0 O1 O2 O3 OE DECODER b O0 O1 O2 O3 2 HD74AC539 Pin Names A0a to A1a A0b to A1b Ea - Eb OEa , OEb P a, P b O0a to O3a O0b to O3b Side A Address Inputs Side B Address Inputs Enable Inputs (Active LOW) Output Enable Inputs (Active LOW) Polarity Control Inputs Side A 3-State Outputs Side B 3-State Outputs Truth Table Inputs Function High impedance Disable Active HIGH output (P = L) OE H L L L L L Active LOW output (P = H) L L L L H L X Z : : : : High Voltage Level Low Voltage Level Immaterial High Impedance E X H L L L L L L L L A1 X X L L H H L L H H A0 X X L H L H L H L H Outputs O0 Z On = P H L L L L H H H L H L L H L H H L L H L H H L H L L L H H H H L O1 Z O2 Z O3 Z 3 HD74AC539 Logic Diagram (one half shown) A1 A0 E P OE O0 O1 O2 O3 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. DC Characteristics (unless otherwise specified) Item Maximum quiescent supply current Maximum quiescent supply current Symbol I CC I CC Max 80 8.0 Unit A A Condition VIN = VCC or ground, VCC = 5.5 V, Ta = Worst case VIN = VCC or ground, VCC = 5.5 V, Ta = 25C 4 HD74AC539 AC Characteristics: HD74AC539 Ta = +25C CL = 50 pF Item Propagation delay An to O n Propagation delay An to O n Propagation delay E to O n Propagation delay E to O n Propagation delay P to O n Propagation delay P to O n Propagation delay OE to O n Propagation delay OE to O n Propagation delay OE to O n Propagation delay OE to O n Note: t LZ t HZ t ZL t ZH t PHL t PLH t PHL t PLH t PHL Symbol t PLH VCC (V)*1 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max 15.0 10.0 15.0 10.0 14.5 9.5 13.5 9.0 16.0 11.5 16.0 11.5 10.0 8.0 9.5 7.5 11.5 9.5 10.5 8.5 Ta = -40C to +85C CL = 50 pF Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 18.0 12.0 18.0 12.0 16.5 11.0 15.5 11.5 19.0 12.5 19.0 12.5 11.5 9.0 11.0 8.5 13.0 10.5 12.0 9.5 ns ns ns ns ns ns ns ns ns Unit ns 1. Voltage Range 3.3 is 3.3 V 0.3 V Voltage Range 5.0 is 5.0 V 0.5 V Capacitance Item Input capacitance Power dissipation capacitance Symbol CIN CPD Typ 4.5 60 Unit pF pF Condition VCC = 5.5 V VCC = 5.0 V 5 Unit: mm 24.50 25.40 Max 20 11 7.00 Max 6.30 1 0.89 1.27 Max 10 1.30 2.54 Min 5.08 Max 7.62 0.51 Min 2.54 0.25 0.48 0.10 0.25 - 0.05 0 - 15 + 0.11 Hitachi Code JEDEC EIAJ Weight (reference value) DP-20N -- Conforms 1.26 g Unit: mm 12.6 13 Max 20 11 1 10 5.5 0.80 Max 2.20 Max *0.22 0.05 0.20 0.04 0.20 7.80 + 0.30 - 1.15 0 - 8 0.70 0.20 1.27 *0.42 0.08 0.40 0.06 0.12 M *Dimension including the plating thickness Base material dimension 0.10 0.10 0.15 Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DA -- Conforms 0.31 g Unit: mm 12.8 13.2 Max 20 11 7.50 1 0.935 Max 10 2.65 Max *0.27 0.05 0.25 0.04 0.25 10.40 + 0.40 - 1.45 0.20 0.10 0 - 8 0.57 0.70 + 0.30 - 1.27 *0.42 0.08 0.40 0.06 0.15 0.12 M Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DB Conforms -- 0.52 g *Dimension including the plating thickness Base material dimension Unit: mm 6.50 6.80 Max 20 11 4.40 1 10 0.65 0.20 0.06 *0.22+0.08 -0.07 0.13 M 0.65 Max *0.17 0.05 0.15 0.04 1.10 Max 0.07 +0.03 -0.04 0 - 8 0.50 0.10 1.0 6.40 0.20 0.10 *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) TTP-20DA -- -- 0.07 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. |
Price & Availability of HD74AC539
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |